Job Description

Air Tanzania Company Limited (ATCL) is expanding its network to meet the needs of its Business Strategy which focus on sustaining the recorded achievements and remain an airline of choice that meets and exceeds customers’ expectations in line of its mission of provision of reliable, safe, and high-quality services. Therefore, applications are invited from qualified Tanzanians to fill the positions mentioned below;

POSITION: FLIGHT OPERATIONS OFFICER (3 POSTS)

MINIMUM ENTRY QUALIFICATIONS

  • Must be a holder of any Bachelor Degree
  • Must have a Certificate of Flight operations/ Flight dispatch or Equivalent
  • Must be a Holder of TCAA Flight Operations/Flight Dispatcher’s License
  • Must be proficient in English Language in accordance with the English Language proficiency requirement contained in TCAR.
  • Must be computer literate.

DUTIES AND RESPONSIBILITIES

  • Assisting the PIC in flight preparation and providing required information;
  • Assisting the PIC in preparing the operational and ATS flight plans;
  • Furnishing the PIC, while in flight, by appropriate means, with information which may be necessary for the safe conduct of the flight;
  • In the event of an emergency, initiating the applicable procedures contained in the Emergency Response Plan;
  • Filing the ATS flight plan with the appropriate ATS unit;
  • When applicable, signing the operational and ATS flight plans;
  • Preparation and signing the Flight Release;
  • Flight following of the flights.
  • Coordination of actions with Space Control/Reservations and Duty/Foreman (MCC) in respect of aircraft status, schedule changes, rerouting and positioning of aircraft for the entire network when deviations from planned operations occur.
  • Briefing of Crew on NOTAMS, Weather Flight Plan and any other factors that may be of concern to the flight Crewmembers.
  • Calculation of RTOW/RLW and Payload for short notice flights. – Operational control of flights within his jurisdiction.
  • Supervision of all Flight Operations Assistants (if engaged) in the Shift and the maintenance of a high standard of conduct and efficiency in the Operations Control Centre. May act as Supervisor Operations Control in the supervisor’s absence from workplace.
  • Responsibility for Crew Accommodation, transports slips, Roster changes, and check-in, in the absence of crew scheduling staff.
  • Perform any other official duties as may be assigned by your supervisor.

POSITION: FLIGHT OPERATIONS ASSISTANT II (3 POSTS)

MINIMUM ENTRY QUALIFICATIONS

  • Holder of Advanced level certificate of Secondary Education preferably in science subjects or equivalent.
  • Must have a Certificate of Flight operations/ Flight dispatch or Equivalent
  • Must be a holder of TCAA Flight Operations/Flight Dispatcher’s License
  • Must be proficient in English Language in accordance with the English Language proficiency requirement contained in TCAR.
  • Must be computer literate.

DUTIES AND RESPONSIBILITIES

  • Monitoring crew reporting on/off duty and crew duty time limitations
  • Checking contents of operational documents and ensure that all flights have the right documents
  • Assisting in preparation of the ATS flight plan
  • Assisting in compiling NOTAM and Meteorological report folders for flight
  • Obtaining aircraft defect report from line maintenance
  • Assisting in preparation of operational forms and voyage report forms
  • Supporting, briefing and/or assisting the F00
  • In the absence of F00 briefing and/or assisting the PIC
  • Makes recommendation in areas of expertise
  • Perform any other official duties as may be assigned by your supervisor.

POSITION: AIRCRAFT TECHNICIAN II – MECHANICAL (10 POSTS)

MINIMUM ENTRY QUALIFICATIONS

Holder of Form IV/VI Certificates plus Diploma in Aircraft Maintenance Engineering with Airframe and Power Plant Trades or Diploma in Mechanical Engineering or equivalent qualifications from recognized institutions.

DUTIES AND RESPONSIBILITIES:

  • Carry out minor repair jobs under supervision.
  • Work as helping hand in workshops, hangar and line maintenance sections under supervision.
  • Assist in removal and installation of aircraft components, repair, assembling and testing of aircraft systems.
  • Assist in repair, test, overhaul and calibration of equipment and tools as per approved procedure.
  • Perform any other duties as may be assigned by the supervisor.

 

POSITION: AIRCRAFT TECHNICIAN II – AVIONICS (8 POSTS)

MINIMUM ENTRY QUALIFICATIONS

Holder of Form IV/VI Certificates plus Diploma in Aircraft Maintenance Engineering with Avionics Trades or Diploma in Electrical, Telecommunication and Electronics Engineering or equivalent qualifications from recognized institutions.

DUTIES AND RESPONSIBILITIES:

  • Carry out minor repair jobs under supervision.
  • Work as helping hand in workshops, hangar and line maintenance sections under supervision.
  • Assist in removal and installation of aircraft components, repair, assembling and testing of aircraft systems.
  • Assist in repair, test, overhaul and calibration of equipment and tools as per approved procedure.
  • Perform any other duties as may be assigned by the supervisor.

POSITION: AIRCRAFT TECHNICIAN II – UPHOLSTERS (3 POSTS)

MINIMUM ENTRY QUALIFICATIONS:

Holder of Form IV/VI Certificates plus Diploma with Vocational Certificate Level III Fitter Mechanics majoring in Upholstery manufacturing or its equivalent qualification from recognized institutions. The candidate shall be required to attend a special course on sewing upholstery for aircraft cabins.

DUTIES AND RESPONSIBILITIES:

  • Sew upholstery (fabric and leather) onto new aircraft seat covers, carpets, car- tens, etc., according to manufacturer’s specifications.
  • Carry out upholstery repairs.
  • Carry out removal and installation of aircraft seats, seat covers, carpets and other cabin upholstery.
  • Perform any other duties as may be assigned by the supervisor.

 

POSITION: AIRCRAFT TECHNICIAN II – STRUCTURES (5 POSTS)

MINIMUM ENTRY QUALIFICATIONS

  • Holder of Form IV/VI Certificates plus Diploma with Vocational Certificate Level III Fitter Mechanics majoring in automobile body repairs or its equivalent qualification from recognized institutions. The candidate shall be required to attend a special course on aircraft structural repairs after being employed.

DUTIES AND RESPONSIBILITIES:

  • Carry out minor and major repair jobs under supervision.
  • Work in workshops, hangar and line maintenance sections under supervision.
  • Assist in removal and installation of aircraft components, repair, assembling and testing of aircraft systems.
  • Perform any other duties as may be assigned by the supervisor.

 32 Job Vacancies at Air Tanzania Company Limited (ATCL)


TERMS AND CONDITIONS:

Five (5) years contract with attractive remuneration and fringe benefits as per ATCL Salary Structure and Incentive Scheme.

MODE OF APPLICATION FOR ALL APPLICANTS:

Interested applicants must submit a dully signed letter for consideration of the application attached with the following:

  • A curriculum vitae (CV),
  • Certified copies of all certificates (including secondary school, birth certificates), other relevant certificates, Applicants who have studied outside Tanzania should have their certificates approved by relevant authorities Tanzania Commission for University (TCU) or National Examination Council- NECTA)
  • Two recent passport size photographs
  • Name and address of at least two reputable referees;
  • Applicant’s reliable contact address, email address and telephone number.

Note: Misrepresentation of qualifications or any other information on application shall warrant legal consequences

CLOSING DATES:

Applicants should reach the undersigned within 14 days from the first date of this announcement.

MANAGING DIRECTOR & CEO,
AIR TANZANIA COMPANY LIMITED,
P.O. Box 543,
DAR ES SALAAM.

The deadline for submitting the application is 29 September 2022.

Read Also: 118 New Job Vacancies Ubungo Municipal Council